- Highly responsive, smooth stops with triple-axis, motion-sensing accelerometer.
- Clean, dash-mounted, OEM-style user interface with 10 tri-color LEDs. Features two installation options: drill mount or surface adhesive mount.
- Developed and test to be compatible with ERICH JAEGER CAN-bus and Solid State towing modules.
Spectrum Integrated Proportional Brake Controller - Auto Calibration and Leveling (Available in New Zealand Only)
|Max axles:||4 (8) brakes|
|Max current draw:||20 amps|
|Dash mount:||Drill or Stick|
|Technology:||Triple Axis Motion-Sensing|
The Spectrum trailer brake controller gives you powerful, precise braking operation in an extremely simple and subtle design inside your vehicle. It features an LED-equipped, rotary knob interface and a separate main module with an advanced triple-axis accelerometer. This allows for an OE look and
feel to be maintained inside the cab of your vehicle. The separated design of the Spectrum brake control allows the main module to be mounted behind the dash of the vehicle, completely out of sight. The interface of the Spectrum trailer brake controller is simple but powerful. It is a single rotary knob
with a push-button in the center that allows the driver to adjust brake power output as well as the rate at which the brakes are applied. It is equipped with ten tri-color LEDs (red, blue and green) to show the automated power output of the control. There is no need for a separate display or additional controls, keeping the dash of your vehicle clean, professional and uncluttered.
Behind the Spectrum brake controller is a powerful main module with a triple-axis motion-sensing accelerometer. This advanced circuit is able to detect the inertia of the vehicle and trailer on all axes of three-dimensional space. Whatever your speed and whatever grade you are travelling on, up or down a hill the Spectrum brake control produces the exact amount of power needed for a smooth, safe stop every time. The main module can be mounted anywhere, at any orientation with the included mounting brackets or adhesive patch.
The Spectrum electric brake controller is a fully compatible unit, able to operate up to eight trailer brakes at a time. It can be used on vehicles with ABS brakes and cruise control, and it works with low-voltage
and PWM systems. The Spectrum installs in ten minutes or less, when used in conjunction with our Erich Jaeger vehicle specific towing harness kits. These wiring harnesses are vehicle-specific and provided a prepared connection point for our Spectrum brake controller. The Spectrum also has automatic leveling and calibration features to simplify the setup process.
|Controls all brake settings with a simple push-button rotary knob
|Clean, dash-mounted, OEM-style user interface with 10 tri-color LEDs.|
|Main module can be mounted anywhere, at any orientation, out of sight.
|Highly responsive, smooth stops with triple-axis, motion-sensing accelerometer.|
|Easily accessible manual override with the press of a button.|
|Features two installation options: drill mount or surface adhesive mount.|
|User-selectable power output and trailer brake light activation|
|Automatic leveling and calibration eliminate setup requirements|
|Built-in reverse-polarity and short-circuit protection|
|Compatible with ABS and cruise control|
|Developed and test to be compatible with ERICH JAEGER|
|Spectrum Brake Controller Kit - 529005-07 - (Available New Zealand Only)|
|Spectrum Brake Controller - 529005-NZ - (Available New Zealand Only)|